Description

The CE-120 positive displacement oval gear flow meters are similar in design to the gear pump. The principle of operation is reversed; instead of the gears driving the medium, the medium drives the gears. A non-intrusive magnetic pickup or hall-effect sensor detects the movement of the gear and as each gear tooth passes the sensor a square wave pulse is produced and a discrete volume of liquid is measured. The resulting pulse train is proportional to the actual flow rate and provides a highly accurate representation of the fluid flow. All meters are designed with highly wear resistant moving parts to provide exceptionally long service life.

Enclosure :Aluminium anodize / SS 304 / SS 316

Rotor :Aluminium anodize / SS 316 / PPS

O-ring : NBR / Viton

Shaft : Hard Stainles Steel-316

Accuracy (standard installation position) : + 1% RS / 0.25% FSD

Maximum working pressure 5 Mpa (35~85% RH)

Fluid & Ambient temperature :- 40 to 140º C

Power voltage : -5/24 V DC

Output : High electric level : Less than 4.5 VDC (input voltage 5 VDC) / Low electric level : Higher THAN 0.5 vdc (INPUT VOLTAGE 5 VDC)

Connection : Thread (M/F)